Angled drip plate for Saturn

3D Fabrication
1

In response to a discussion today … here’s a link to an angled holder to allow drips to drain off of the Saturn build plate.

image
image768×1024 130 KB

1 Like
2

Thank you kindly! :slight_smile:

1 Like
3

Thank you Chris We will get one made for the space

1 Like
4

You might also consider printing two of the Mars ones also. They make a big difference in clean up because so much more of the resin drains away.

I neglected to mention this in the Mars post, but the Mars design I put into the committee drive has been modified to use 8-32 bolts and nuts.

1 Like