I had started to produce my own CNC router, but due to some life changes coming up, I will not be needing this machine. So I am going to offer this machine to the person who offers me the most money for it. Send me a PM, and on Friday the 5th at 5PM the person who offers the most will get all of the following items.
The basic machine design uses custom machined aluminum end plates with OpenBeam structural members joining them. I then used 500mm linear rails from adatruit and there are two of these linear bearings
Here is a picture of what I have so far assembled:
The above is most of the needed parts for the x-axis, including the 12mm ball screw and mounting hardware. I am also including an additional ball screw with mounting (same style in picture) that is still in the bubble wrap. Plus the following parts
Three of the following (used with the ball screws)
This is what the two long ball screw assemblies are that are being included
This is part of what I intended for the Y-axis motor mount
This is the spindle assembly
And finally this is the z-axis ball screw I purchased for this.
No minimum, feel free to low ball your purchase offer. This lot of stuff goes on Friday!
