Good morning all!
Me and Stephanie took a tour together and signed up to be members! We are so stoked and excited to be part of the makers space! 
I was curious what the next steps are for being allowed to use the EufyMake printer. Annie was amazing with the tour and suggested we reach out to @mstreet and @SWA (I apologize I hope this is the correct Burt) on possible classes or run throughs?
We saw the laser starter class and will be taking that together soon, but wasn’t sure if that is a perquisite for the Eufy.
Of course we are open to any other suggestions or protocols we would need to follow for being able to use the UV printer.
Thank you so much in advance!
Looks like there are no classes up on the calendar right now, but I’m sure that will change rapidly, sometimes it takes a few days for submitted classes to publish to the calendar system.
Yes, you do need to take " Eufymake UV Resin Printer" course to be signed off to use the machine.
There are usually one to two classes for this tool each week, check back to the calendar often, I’m sure one of the instructors will also chime in here soon with an update for you.
https://dallasmakerspace.org/calendar/
2 Likes
Welcome to the space! @LAndras is right, we’re working on getting more classes up for May as I just finished 2 this week to round out April. I’ll post back here when I’ve got the next round up on the calendar or when @haleydenyse puts up some. I’m working on a project for a demo the space is doing for the Dallas Zoo, so next set of classes on my end will likely be the week of May 11th. Hope to see you there!
1 Like
Thank you so much, that sounds perfect!
I’ve got the calendar link saved and we will keep a close eye on it for one of the classes.
Much appreciated!
Thank you! We are so excited to be here. During the tour I was so in awe. Kicking myself for not taking a tour and signing up sooner.
That sounds wonderful and I so appreciate it! I’ll keep an eye our for the May 11th week. That’s so cool about the Dallas Zoo Demo!
1 Like
I just talked with Haley and she’s putting on day, night, and afternoon classes this week starting Monday while I’m tied up. I’ll ping you as soon as they’re published so you have options. So excited to see new members joining and jumping into classes!
1 Like
You are the best @mstreet! Thank you so much!
I would also like to take the class…
1 Like
Also tagging in @Kayleigh as Haley had mentioned you wanting to take the Tuesday class. Link above 
2 Likes
This is so exciting! Steph is looking at her schedule to see if she can do Thursday. @mstreet how many people need to be in the class for it to be held and not cancelled?
I’ll defer to @haleydenyse on hers, but I typically hold to at least 3 people when the class size is 10
Thanks! Yes I’m interested in taking the class on next Tuesday May 12th. I spoke with @haleydenyse about it. We talked about 8:00pm. Will it be posted on the calendar? I have a friend who is not a DMS member who also wants to take the class.
@kayleigh @haleydenyse Me and Stephanie (both DMS members) would love to be part of the May 12th, 8pm class! That will give us at least 3 people for that slot.
Yep yep! It can take a few days to show up on the calendar, please keep an eye out
1 Like
Took down this comment as it had to do with the class schedule site having an error, but it seems to be working fine now!
@Steph for visibility on the thread! 
Hi @Steph @E.k.ricks @windsurf713 , I’ve put up a class on Tuesday for 7 pm as Haley is out of town. I can’t quite start at 8 pm, but hopefully this will work and I’ve made it open to non members. If not, there are a few other sessions and a Saturday one as well (all listed here): Free EufyMake UV Printer Classes in May - #2 by mstreet
Please use this link to sign up for the class, we’re working on getting it also posted on the demo room site:
https://calendar.dallasmakerspace.org/events/view/28290
If none of these work, please let me know and we’ll see if we can get a different time up. Thanks all!
1 Like
Hi there. My friend Greg (non-DMS member) signed me and him up for the class at 7 PM tonight. Please let me know if there are any issues. See you tonight!
1 Like