Hi everyone,
I’m looking to commission a member for a two-part project to create a custom concrete stepping stone mold. I need an Alabama state shape cut on the CNC, followed by a vacuum form pull.
The Details:
The Shape: The state of Alabama, roughly 12" x 8".
The Buck (CNC): Needs to be 1.5 inches thick with a proper draft angle so the plastic will release after cooling. I need the operator to supply and prep the MDF for this. (If you have 3/4" scrap laying around that you can quickly glue and clamp into a 1.5" block, that is perfect!).
The Mold (Vacuum Former): Pulling a thick plastic shell over the finished buck on the Formech machine.
Materials:
I will purchase and bring the required ABS plastic sheet (likely from Allied Plastics—let me know what thickness/dimensions you prefer for your machine).
I am happy to pay your rate for the machine time, your labor, and the scrap MDF used for the buck. If you’re certified on both machines and interested in knocking this out, please let me know what you would charge!
My email is [email protected]