New Year Adafruit Order (Shipped)

Electronics
#41

@Bill here is your updated numbers and one out of stock item.

#42

Everyone get your finals in today by noon. I will prep a spreadsheet with everyone’s total and you can let me know how you intend to pay. Options: 1) send me $ to my PayPal at [email protected], 2) drop a check into the electronics locker in the breakroom, 3) COD.

#43

1x https://www.adafruit.com/products/2277 64x32 RGB LED Matrix - 5mm pitch ($71.96 - 10% off)
1x http://www.adafruit.com/products/192 Mega protoshield for Arduino ($14.95 - no discount)
2x https://www.adafruit.com/product/658 5V 10A switching power supply ($25.00 - no discount)
2x https://www.adafruit.com/products/368 Female DC Power adapter - 2.1mm jack to screw terminal block ($1.40 - 30% off)
4x http://www.adafruit.com/products/2378 Arduino Pro Mini 328 - 5V/16 MHz ($9.95 - no discount)
1x http://www.adafruit.com/products/70 FTDI Serial TTL-232 USB Cable ($12.57 - 30% off)
1x http://www.adafruit.com/products/284 FTDI Friend + extras - v1.0 ($10.50 - 29% off)
1x https://www.adafruit.com/products/1554 Adafruit PCB Ruler v2 - 6" ($3.50 - 29% off)

Final answer. Thanks for doing this. I will put a check into the locker tonight.

#44

Final answer? I’ll check it against your wishlist I put in already. I assume you just dropped the out of stock Bus Pirate. :wink:

Edir:

Argh https://www.adafruit.com/products/284 FTDI Friend + extras - v1.0 is out of stock too.

#45

I totaled mine to 59.54. Hope my math is right. Lol I will send you a PayPal I guess.

#46

that is correct sir, can you add 3% for PayPal’s vig = $61.33

otherwise not to worry.

#47

Yea, dum me forgot about PayPal’s 3% fee. If you pay using them can you please add 3%. If you have already paid, don’t worry about it.

#48

Ok the final order spreadsheet:

@themitch22, @knotbob, @bill, @technoprobic, @Shawn_Christian, @coloneldan, @wanderson, @tbjk

Let me know if these are good to go.

#49

I’m good to go and I paid via PayPal + 3%. Thanks!

#50

Can you add my parts of 1/28 to my order? I’m not worried about the discount, still save on shipping, and they’re for the same projects.

#51

Good to go. Thank you for doing this.

#52

@technoprobic, they are on the spreadsheet unless I’m confused.

#53

Whoops. I’m good to go. Dropped off money order in the locker.

#54

Looks good. I will go by the Space this evening and drop off a check.

Thanks, again.
Lance

#55

I just sent you mine. Let me know if you don’t get it. I added in some more money just as an added handling fee/ show of appreciation

#56

I’m good to go. I’ll drop off a check in the Elab locker tomorrow.

#57

My part looks good except you forgot the two solder suckers from the final list. That brings my total to $225.49. I will send payment through Paypal.

– Shawn Christian

#58

@Shawn_Christian, unfortunately that is out of stock. do you still want the tips for it though?

#59

You omitted the discount on the LED matrix - it should be $71.96. If it is not too late, I would like to up the quantity of the Pro Mini to 10 so that I get the 10% discount.

I am at the space now and will put my check in the locker before I leave.

Thanks.

#60

@Bill, damn Adafruit, they upped the QTY on the matrix to 10 units, or I screwed up the quote. :wink: Do you still want the matrix?

The pro minis are now $8.96 for your Qty 10 ($89.60) total is $253.37