Multicam Videos

We will update this thread anytime we add a new video. When you want to access the videos, just remember to search for “Multicam Videos”.

Topics available:

  • 201901 Multicam Update - https://youtu.be/o-sNPIZbaK8 - Information on changes to the spoilboard and addition of zones.

  • New - Spoilboard Repair - https://youtu.be/Oy_wv4T0HH0 - How to make a repair (including video demonstration)

  • New - Setting Z Height Using Fasmer Method - https://youtu.be/JVY5e_rjmQU - Fasmer Method is an alternative way to specify both top and bottom of material in one step. It is a great way to ensure you don’t have issues with cut through or leaving onion skins.

  • Hold Down Options - https://youtu.be/uV3thBJgTx0 - Discussion of some additional options for holding down work material.

  • New - Hold Down Helpers - https://youtu.be/cV6d0ozY6zA - When/how to use the new helpers in securing your material.

3 Likes

Could we possibly get all these videos added to a playlist on the Dallas Makerspace YouTube channel?

It would be handy to have all makerspace videos in one place.

1 Like

Do you want me to link to these from the Multicam wiki page?

Yes, good suggestion!

OK, will do. Probably this morning.

[EDIT: Done. I had already added a section on Operational Notes and Videos previously, but now it also includes these latest additions]

New video: There is a new process for aligning work and related jig. Check out this quick video to learn more on the Alignment Guide.

1 Like

I added it to the wiki.

Great videos Bert - you are really good at making them

3 Likes

Great idea!

Mark, these videos are made for Makers who have been trained to use the Multicam. We have them all together on the Multicam Wiki page.