Handy Guide to Lasering Plastics

Technical Application Article Laser Processing Guide Plastics_0.pdf (1.7 MB)
LaserProcessingGuide_Plastics.pdf

2 Likes

Thanks for posting the reference document Matt! Interesting reading thus far.

Note to all DMS Members: The DMS-approved list for Lasering materials at DMS is located on the ‘Laser Committee Wiki’. The DMS-published list of approved materials for lasering supersedes any/all documentation found online, including this one. When in doubt, always refer to the Laser Committee Wiki.

That said, this is an interesting read, and I look forward to finishing it.

~Scott

2 Likes

Thanks for posting this! I added the link to the wiki.

@Scott_Blevins, I added this link to the “Laser materials page”, at the bottom, in the section A Note about Acrylics.

ADDITIONAL REFERENCE MATERIAL:

The DMS-published list of approved materials for lasering (above) supersedes any/all documentation found online, including these below. When in doubt, always refer to the Laser Committee Wiki list.

  • Handy Guide to Processing Plastics with link
1 Like

I didn’t take the time to compare it to our list but it definitely warns against lasing PVC.

If someone has time it might be useful to call out any discrepancies between this document and our policies, to the extent there are any.