Advice on plywood purchase

I got some locations from Mike Jury for purchasing wood, but what about something like Baltic birch plywood?

3 Likes

Central Harwoods has great Baltic Birch in basically any grade/thickness you want.
http://centralhardwoods.com/

4 Likes

Obviously, we hope folks like Frank will jump in with specific, personal experience recommendations, but more generically, there’s a page on the wiki that’s been collated from those times this has come up before; most of the time, the recommended places are on this list.
https://dallasmakerspace.org/wiki/Wood_Suppliers

3 Likes

Central Hardwoods is great. For small pieces of birch plywood, Rockler has 'em in 12 and 18mm (~1/2 and 3/4). They might have 6mm too. I just bought some 18mm x 24x30" for $10.49.

2 Likes

Dakota hardwoods is where I get my 1/4 Baltic Birch. $11 for a 5’x5’ sheet

5 Likes

I order from Plywood Company of Ft. Worth. https://www.plywoodcompany.com/
They have a wide selection of plywood and lumber. They also offer cutting/routing/planing services, and delivery.

3 Likes

Thanks! Figured there was something like that out there. Still leaning the ropes!

1 Like

Dakota has a 10% discount for members of the MakerSpace.

Tom & team are great at Hardwood Lumber. For lumber, they let you pick out the piece you want.

Most places will cut down the plywood for $5 per cut. Central asks for 24 hour notice.

1 Like