Dallas Makerspace Show and Tell - March 2017

:slight_smile:
I’m wondering if it’s left aromatic, or finished…

1 Like

@John_Marlow and @jast, I originally was going to do a cherry top but it wasn’t turning out like I wanted and the scale was wrong (too thin). At 11th hour, I switched to cedar. It was a couple cedar 4x4s from Home Depot that are supposed to be fence posts! Used the band saw to make them 2X4s and I was off and running. Finish is several coats of poly to protect if a glass is left on it. (And base finish is black primer followed by a black “hammered” spray paint.)

5 Likes

Nice project. It would make for a great “make and take” advanced metal/wood class.

1 Like

Just don’t make it triangular! Way too much time involved in the angles…

3 Likes

A six-month project class. I’m in! :smiley:

2 Likes

I’ve created a new thread for continued discussion about this being a potential “Make & Take” Advanced metal/wood class (and any other general discussion about this particular project) so y’all can focus on it as much as y’all want outside of this “Show & Tell” thread. :wink:

BTW ~ I do agree that it’s a beautiful (and solid) piece! Your mother is very lucky! :slight_smile: :slight_smile:
…and, that it would make a great project! :smiley:

1 Like

Replaced pads and rotors on my car, giant torque wrench comes in handy when torquing caliper bolts to 162 ft lbs

5 Likes

I made this while I was hanging out at dms this week. It’s a leaf-cut amethyst CZ, along with some freshwater pearls and Austrian crystal. The gold color is for a birthstone, but I think it looks striking with the deep purple of the focal stone. I shaped the frame around the setting to complement the shape of the focal stone and its orientation. The metal is 14k-gf.

17 Likes

My (grand)nephews, ages 1 and 2, will be the lucky recipients of a fabric/soft book I have been making for the past several months. I got a lot of ideas online, especially Pinterest, and then modified and built on those. The “book” has 15 pages of fun learning activities, and a “tote bag”. It is bound with rings so the pages can be separated between the two boys, or divided up for more age-appropriate groupings.

Some of the pages are simple while others are gloriously complex. The textures page has a piece of “reversible” sequins - one of the coolest things I’ve ever seen and it just begs to be touched - thanks to @Kriskat30 . In addition to the obvious sewing and quilting, this involved a lot of laser cutting, applique’, and embroidery programming/ stitching. The laser makes applique’ a lot easier, especially with synthetic fabrics. I mean, check out the fingers and toes of the frog on the tote bag. I could not have done that by hand.

And lest anyone ask, these are RLS (real-life scale) - about 9" x 8". No miniatures of these are even remotely contemplated!




28 Likes

Again. Everything everything everything you do is amazing.

6 Likes

Printed these little raven skulls and then attached jump rings to them to make a keychain. I think I need to learn how to do jump ring soldering too to feel secure in the joints that I’ve made though. If anyone wants one (even of a different skull), let me know (PM or reply).

-the purring dork

10 Likes

Wow. What lucky Grand nephews you have. These will be treasures that they can hand down to their children.
You are simply inspirational to us all. Thank you for sharing these with us.

3 Likes

Dog skull would be neat.

Although I haven’t done a keychain one, I have done a life-size wolf skull in the past (full screen for details).

    

    

-the purring dork

8 Likes

Looks pretty cool. At one point in time I looked to see if there were any animal parts on thingiverse and they were all kinda crap. That one is well done though. Did you scan a real skull or model it?

Here is my project that I made yesterday on the plasma cam and tig welder to raise the skull up about an inch from the flag.

27 Likes

Nice job using the tools at DMS to make something very cool. Gonna hang it on a flagpole or wall?

1 Like

Thanks this will be a wall hanger for my office.

2 Likes

The wolf skull that I printed is from 3DKitbash and the wolf skull is one of their free models on Thingiverse ( http://www.thingiverse.com/thing:768695 ). Really easy to print and no support required and it uses printed pins to lock the pieces together (although I usually add super glue too). Most of their models are really high quality although some of their skulls are designed with plaques in mind (flat back).

I have done additional work with modeling/cleaning up CT scan data of a skull but it takes forever to deal with support if you’re not careful.

-the purring dork

I laser-cut some templates for a couple of leather projects:


And made a couple of corner-radius templates (2, 2.5, 3, 3.5, 4, 4.5, 5 and 5.5mm corners) in the same fashion:

And made a wallet using one of the templates:


(3/4 oz veg tan Tandy cowhide, Angelus Army Tan, 4mm stitch spacing, 0.6mm Havana Cigar Ritza tiger thread)

Templates have been donated with CA blessing, I’ll be writing a post in the Leather category with more info and links to build-along projects.

14 Likes